Betriebsferien vom 7. bis 14. April 2025. Bestellungen, die bis spätestens 4. April 2025 eingehen, werden garantiert vor den Ferien versendet. Weitere Informationen
Upload

SUS316L – Stainless Steel

SUS316L – Stainless Steel

Korrosionsbeständiger, hochfester Edelstahl mit guter Verarbeitbarkeit.

Estimated delivery time:
10 - 15 Werktage
The delivery time extends from the time the order is placed until the models are received.
Maximum print size:
300 x 300 x 340mm
Larger models can be printed by dividing them into several parts and then joining them together.
Standard layer height:
0.04 mm
Tolerance:
± 0.3%
Heat resistance:
900°C
The model can be used up to this temperature without being damaged.
Surface type:
Matt Shiny

Available colors

Grey

Available post-processing

Sandblasting Wärmebehandlung Oberflächenbearbeitung Gewindeschneiden

Gallery

Suitable for

  • Funktionsbauteile in korrosiver Umgebung
  • Medizintechnik
  • Temperaturbelastete Bauteile
  • Modelle im Lebensmittelbereich

Unsuitable for

  • Sehr grosse Bauteile
  • Teile mit extrem hoher mechanischer Belastung (Titan ist besser in dem Bereich)

Additional information

Die Oberflächenbearbeitung wird standardmässig von uns durchgeführt. Das gewünschte Oberflächenfinish (matt oder glänzend durch Sandstrahlen) kann individuell in unserem Online-Rechner ausgewählt werden. Für Gewindeschneiden bitten wir Sie, uns direkt zu kontaktieren.
Edelstahl (SUS316L) ist ein widerstandsfähiges, korrosionsbeständiges Material, das sich besonders für anspruchsvolle Umgebungen eignet. Es wird durch das selektive Laserschmelzen von Edelstahlpulver hergestellt, wodurch hochwertige Metallteile entstehen, die sich durch hohe Festigkeit und Langlebigkeit auszeichnen. 3D-gedruckter Edelstahl unterscheidet sich optisch von poliertem oder gewalztem Edelstahl: Die Oberfläche ist mattgrau, leicht körnig und weist eine gleichmässige Struktur auf. SUS316L eignet sich ideal für funktionale Metallteile, die Korrosion, Chemikalien und Hitze ausgesetzt sind. Typische Einsatzbereiche sind industrielle Bauteile, medizinische Komponenten, Werkzeuge, Halterungen sowie individuelle Prototypen.

Minimum wall thickness with supported wall

A supported wall is one that is connected to other walls on two or more sides.

Minimum wall thickness for unsupported wall

An unsupported wall is one that is connected to other walls on less than two sides.

Minimum supported wire thickness with support structure

A wire is a feature whose length is more than five times its width. A supported wire is connected to walls on both sides.

Minimum supported wire thickness without support structure

A wire is a feature whose length is more than five times its width. An unsupported wire is connected to walls on less than two sides.

Minimum hole diameter

The precision of a hole depends not only on its diameter, but also on the thickness of the wall in which it is printed. The thicker the wall, the less accurate the hole can be. For holes that go all the way through, it must also be ensured that there is a clear line of sight so that all excess material can be removed during post-processing.

Minimal raised detail

A detail is a feature whose length is less than twice its width. The minimum size of details is determined by the printer resolution. If the detail dimensions are below this minimum, the printer may not be able to reproduce them accurately. Details that are too small can also be smoothed out during polishing and thus disappear.

To ensure that details are clearly displayed, they should be larger than the specified minimum. We may not be able to print products with details below the minimum size as the end result will not match your design. If your product contains smaller details, try to enlarge them, remove them or choose a material with finer detail reproduction.

Minimal engraved detail

A detail is a feature whose length is less than twice its width. Engraved or recessed details are those that go into a surface.

Minimum distance between components

The distance is the space between two parts, walls or wires. To achieve a successful print result, the gap between parts, walls and wires should be greater than the specified minimum. If the distance is too small, it may help to increase the gap or connect the parts or features if their independence is not necessary. Alternatively, a material with a smaller minimum gap can be selected.

Included parts possible?

Sometimes interlocking or moving parts cannot be printed because the supports inside the cross-section cannot be removed.

No

Support structures needed?

As each layer must build on the previous one, some materials at angles greater than 45 degrees usually require supports to be printed along with the design. Supports are not inherently detrimental to your design, but they increase the complexity of the printing process and result in a less smooth surface on overhanging parts.

No

Properties

Weather resistant

Heat resistant

Elastic

High strength

Chemically resistant

Biodegradable

Technical data sheet

Technical data sheet
Safety sheet
DMLS (Direct Metal Laser Sintering) How it works: In the DMLS process, metal powder is selectively melted layer by layer using a laser. The laser heats the desired areas of the powder, causing it to sinter into a dense, metallic component. Each layer is lowered after production and fresh metal powder is applied. This process enables the production of highly precise and complex metal parts. Advantages of DMLS:
  • Hochwertige Metallteile: DMLS erzeugt Bauteile mit mechanischen Eigenschaften, die mit konventionellen Fertigungsmethoden vergleichbar sind.
  • Komplexe Geometrien: Selbst filigrane oder innenliegende Strukturen können gefertigt werden, was für konventionelle Verfahren oft nicht möglich ist.
  • Vielseitigkeit: Eine breite Palette von Metalllegierungen ist verfügbar, darunter Aluminium, Titan, Edelstahl und mehr.
Areas of application: DMLS is ideal for the production of components that require high strength, precision and heat resistance.
  • Medizintechnik: Implantate und chirurgische Werkzeuge.
  • Luft- und Raumfahrt: Leichte, belastbare Bauteile mit komplexer Geometrie.
  • Automobilindustrie: Funktionsprototypen und Bauteile für den Endgebrauch.
  • Industrie: Werkzeugteile, Formenbau und maßgeschneiderte Komponenten.

Do you have any questions?

If you have any questions or would like a customized offer, please feel free to contact us. We usually reply on the same working day.

Swiss3D - Your reliable print-on-demand 3D printing service for high-quality and customized 3D prints in Switzerland.

Follow us -

Linkedin-in Instagram

Links

Contact us

Copyright © 2025 - Swiss3D GmbH